• <menu id="oyooc"></menu>
  • Product Single screw pump

    Direct connected single screw pump

    Direct connected single screw pump

    Contact Us

    Product Details

    1. Introduction

    Single screw pump is an important fluid conveying equipment. It is widely used in various industrial processes, also known as eccentric screw pump, G-type screw pump or electric single screw pump, because it is not only suitable for medium with low viscosity such as water, but also for suspension with solid particles or short fibers, and medium with very high viscosity.

    Xinglong single screw pump is a kind of positive displacement pump, through the meshing pairs (stator and rotor) between the closed formation of a certain geometry cavity to transport liquid. The material of pump overflow parts is determined according to the specific characteristics of fluid materials transported.

    The direct connected single screw pump is directly driven by the reduction motor, which has compact structure and short overall length. The transmission shaft of the pump is driven by the shaft of the reduction motor, which has enough strength to bear the torque and axial force produced by the rotor in the working process. Therefore, the direct connected single screw pump is used in the normal pressure transmission condition.

    2. Optimize the design structure


    3. Advantages

    It is widely used to transport all flowing and even non flowing materials

    Continuous low pulsation conveying

    Media will not be agitated, squeezed or sheared during pumping

    The conveying capacity is directly proportional to the rotating speed, and the conveying capacity can be adjusted by frequency conversion, with high precision metering conveying


    All liquids can be pumped with minimal agitation and pulsation

    Easy maintenance

    4. Solve the transportation requirements for you, including

    Full series of standardization, maximum flow up to 400 m3 / h

    Output pressure up to 24 bar

    Different materials can be used for overflow metal parts, from tool steel to nickel / chromium steel, high acid resistant materials such as duplex stainless steel, Hastelloy and titanium alloy

    Different stator rubbers are used, such as NBR, EPDM, CSM, PTFE, FPM and HNBR.

    Packing seal or mechanical seal, other sealing forms can also be selected

    Strict quality standards and test procedures ensure that you get the best performance screw pump. We continue to provide after-sales technical support (4008055600) to ensure the best performance under various service conditions.


  • <menu id="oyooc"></menu>
  • 粗壮挺进邻居人妻_韩国公妇里乱片a片在线观看_熟妇人妻中文av无码_2012手机免费观看版国语