• <menu id="oyooc"></menu>
  • Product Single screw pump

    Bearing pedestal single screw pump

    Bearing pedestal single screw pump

    Contact Us

    Product Details

    1 Introduction

    Single screw pump is an important fluid conveying equipment. It is widely used in various industrial processes, also known as eccentric screw pump, G-type screw pump or electric single screw pump, because it is not only suitable for medium with low viscosity such as water, but also for suspension with solid particles or short fibers, and medium with very high viscosity.

    Xinglong single screw pump is a kind of positive displacement pump, through the meshing pairs (stator and rotor) between the closed formation of a certain geometry cavity to transport liquid. The material of pump overflow parts is determined according to the specific characteristics of fluid materials transported.

    The bearing pedestal type single screw pump adopts cast iron bearing pedestal. The drive shaft of the pump is installed in the bearing seat, which has enough strength to bear the torque and axial force produced by the rotor in the working process. Pump rotating parts can be made of various materials such as matching steel, tool steel, stainless steel 304 / 316, duplex stainless steel, etc., with strong structural bearing capacity and good rigidity. Therefore, bearing pedestal single screw pump is often used for high pressure transmission.

    2 optimize the design structure

    A2中文-1.png

     

    3 advantages

    It is widely used to transport all flowing and even non flowing materials

    Continuous low pulsation conveying

    Media will not be agitated, squeezed or sheared during pumping

    The conveying capacity is directly proportional to the rotating speed, and the conveying capacity can be adjusted by frequency conversion, with high precision metering conveying

    efficient

    All liquids can be pumped with minimal agitation and pulsation

    Easy maintenance

    High pressure transmission capacity

    Modular configuration


    4 to solve the transportation requirements for you, including

    Full series of standardization, the maximum flow can reach 600 m3 / h

    Output pressure up to 48 bar

    Different materials can be used for overflow metal parts, from tool steel to nickel / chromium steel, high acid resistant materials such as duplex stainless steel, Hastelloy and titanium alloy

    Different stator rubbers are used, such as NBR, EPDM, CSM, PTFE, FPM and HNBR.

    Packing seal or mechanical seal, other sealing forms can also be selected


    Strict quality standards and test procedures ensure that you get the best performance screw pump. We continue to provide after-sales technical support (4008055600) to ensure the best performance under various service conditions.

     


  • <menu id="oyooc"></menu>
  • 粗壮挺进邻居人妻_韩国公妇里乱片a片在线观看_熟妇人妻中文av无码_2012手机免费观看版国语