• <menu id="oyooc"></menu>
  • Product Matching device

    Mobile single screw pump

    Mobile single screw pump

    Contact Us

    Product Details

    Brief introduction

    Single screw pump is an important fluid conveying equipment. It is widely used in various industrial processes, also known as eccentric screw pump, G-type screw pump or electric single screw pump, because it is not only suitable for medium with low viscosity such as water, but also for suspension with solid particles or short fibers, and medium with very high viscosity.

    Xinglong single screw pump is a kind of positive displacement pump, through the meshing pairs (stator and rotor) between the closed formation of a certain geometry cavity to transport liquid. The material of pump overflow parts is determined according to the specific characteristics of fluid materials transported.

    The mobile single screw pump adopts the design of trolley equipment (such as trolley, trolley, lifting device). It can be moved to the work site where the medium needs to be pumped. When the conveying process is completed, it can be pumped to the temporary warehouse. It can be designed vertically, can lift the oil tank emptying condition, can also be installed on the trolley or the horizontal / inclined design of the trolley, which is convenient for users to use flexibly. The movable single screw pump is often used for the working conditions of the installation of the mobile trolley.

    移動式單螺桿泵.png

    Advantages

    The pump can adapt to the application of mobile working conditions, and it can be designed horizontally / vertically / obliquely

    Continuous low pulsation conveying

    Media will not be agitated, squeezed or sheared during pumping

    The conveying capacity is directly proportional to the rotating speed, and the conveying capacity can be adjusted by frequency conversion, with high precision metering conveying

    efficient

    All liquids can be pumped with minimal agitation and pulsation

    Easy maintenance


    For you to solve transport requirements include

    The whole series is standardized, and the maximum flow can reach 10 m3 / h

    Output pressure up to 18 bar

    Different materials can be used for overflow metal parts, from tool steel to nickel / chromium steel, high acid resistant materials such as duplex stainless steel, Hastelloy and titanium alloy

    Different stator rubbers are used, such as NBR, EPDM, CSM, PTFE, FPM and HNBR.

    Standard mechanical seal, other seal forms can also be selected


    Strict quality standards and test procedures ensure that you get the best performance screw pump. We continue to provide after-sales technical support (4008055600) to ensure the best performance under various service conditions.


  • <menu id="oyooc"></menu>
  • 粗壮挺进邻居人妻_韩国公妇里乱片a片在线观看_熟妇人妻中文av无码_2012手机免费观看版国语